SHIMS DMR-503/2 LB KIT CUSTOM COLOR

Sold by: 2lb.

DMR-503 Replication Putty is a two-part silicone elastomer with the consistency of a workable paste in a one-to-one mix. It is mixed by kneading with the fingers and is non-hazardous. Once mixed, DMR-503 can be pressed onto the object to be replicated and will cure rapidly at room temperature into a firm elastomer with a Shore A Durometer of 50, and a dimensional accuracy of 99.95%. DMR-503 is designed for applications where a non-liquid replication material is needed.

Advantages of the DMR-Series Flexible Replication Systems

• Quick and easy to mix & use
• A replication material for any application
• Cures fast at room temperature
• Leaves no film or residue
• Safe to use
• Accurate dimensional qualities (minimal cure shrinkage)
• Indisputable physical evidence - a permanent record
• Can be used with optical comparitors for dimensional measurements
• Available in two, eight and ten pound kit sizes (total weight of hardener and base).

DMR-503 is a product from the DYNAMOLD range.

SDS:

• DMR_503A_SDS_ENGLISH-HAZCOM-NA.PDF
• DMR_503B_SDS_ENGLISH-HAZCOM-NA.PDF

TDS

• DMR_503_TDS_ENGLISH.PDF
• DMR-503_TDS_FRENCH.PDF